{"id":224,"date":"2026-11-21T12:05:22","date_gmt":"2026-11-21T12:05:22","guid":{"rendered":"https:\/\/www.royalrebuilds.co.uk\/blog\/?p=224"},"modified":"2026-11-21T12:42:16","modified_gmt":"2026-11-21T12:42:16","slug":"top-7-land-rover-discovery-4-engine-failures-warning-signs","status":"publish","type":"post","link":"https:\/\/www.royalrebuilds.co.uk\/blog\/top-7-land-rover-discovery-4-engine-failures-warning-signs\/","title":{"rendered":"Top 7 Land Rover Discovery 4 Engine Failures &amp; Warning Signs"},"content":{"rendered":"\n<h1 class=\"wp-block-heading\">Land Rover Discovery 4 Engine Problems Owners Shouldn\u2019t Ignore<\/h1>\n\n\n\n<p>The Discovery 4 is a capable family and towing vehicle, but its diesel engines can develop costly faults. UK models from 2009 to 2016 include the early 2.7 TDV6 and the more common 3.0 TDV6 and SDV6. Knocking, low oil pressure, poor acceleration and coolant loss can point to different faults. Some need minor repairs; crankshaft damage can stop the engine. Owners searching for a <a href=\"https:\/\/www.royalrebuilds.co.uk\/land-rover-discovery-4-engines\">Land Rover Discovery 4 Engine for Sale<\/a> should first find out exactly what failed. Replacing the engine without checking lubrication, cooling and turbo components may leave the cause unresolved.<\/p>\n\n\n\n<p>A Land Rover Discovery 4 Engine Replacement becomes necessary when major internal damage makes a rebuild unsafe or uneconomical. A failed crankshaft, connecting rod or block can make repairs costly. However, a warning light or reduced power does not automatically mean the engine has failed. Fault code reading, an oil pressure test and a physical inspection can separate a serious mechanical fault from an EGR, boost or sensor problem. This guide covers failure points, warning signs, diagnostic checks, UK prices and ways to prevent repeat damage.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Quick Triage: When to Stop Driving Immediately<\/h2>\n\n\n\n<p>Before looking at individual faults, use this simple rule to protect your vehicle from terminal internal damage:<\/p>\n\n\n\n<figure class=\"wp-block-table is-style-regular table table-bordered\"><table class=\"has-fixed-layout\"><thead><tr><td><strong>Severity Level<\/strong><\/td><td><strong>Warning Signs You Notice<\/strong><\/td><td><strong>Immediate Action Required<\/strong><\/td><\/tr><\/thead><tbody><tr><td><strong>Critical (Stop Now)<\/strong><\/td><td>Heavy metallic knocking, red oil pressure warning light, rising temperature gauge, or thick blue smoke<\/td><td>Pull over safely, switch off the engine, and arrange recovery.<\/td><\/tr><tr><td><strong>Moderate (Book Soon)<\/strong><\/td><td>Brief cold-start rattle, whistling under boost, black exhaust smoke, or intermittent limp mode<\/td><td>Reduce speed, avoid heavy acceleration, and book a specialist diagnostic scan.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\">Top 7 Land Rover Discovery 4 Engine Problems<\/h2>\n\n\n\n<p>Recognising these seven Land Rover Discovery 4 Engine Problems early and applying the right fix gives you the best chance of saving the original engine unit.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">1. Crankshaft and Main Bearing Failure<\/h3>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"892\" height=\"450\" src=\"https:\/\/www.royalrebuilds.co.uk\/blog\/wp-content\/uploads\/2026\/11\/Crankshaft-and-Main-Bearing-Failure.png\" alt=\"\" class=\"wp-image-232\" title=\"Crankshaft and Main Bearing Failure\" srcset=\"https:\/\/www.royalrebuilds.co.uk\/blog\/wp-content\/uploads\/2026\/11\/Crankshaft-and-Main-Bearing-Failure.png 892w, https:\/\/www.royalrebuilds.co.uk\/blog\/wp-content\/uploads\/2026\/11\/Crankshaft-and-Main-Bearing-Failure-300x151.png 300w, https:\/\/www.royalrebuilds.co.uk\/blog\/wp-content\/uploads\/2026\/11\/Crankshaft-and-Main-Bearing-Failure-768x387.png 768w\" sizes=\"auto, (max-width: 892px) 100vw, 892px\" \/><\/figure>\n\n\n\n<p>Crankshaft failure is the most serious mechanical fault on the 2.7 TDV6 and 3.0 SDV6 engines. The crankshaft relies on a thin film of pressurised oil to spin cleanly inside its main and big-end bearings. Oil dilution from interrupted DPF regenerations, blocked oil pickup pipes, or extended service intervals starves these bearings of lubrication. Once a bearing spins, friction scores the crankshaft journals and can snap the shaft completely.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Warning signs:<\/strong> A deep, rhythmic metallic knocking sound from the lower engine block that speeds up with engine revs, a flickering oil pressure light at warm idle, or fine copper and silver metal flakes found inside the oil filter housing.<\/li>\n\n\n\n<li><strong>Solution:<\/strong> Stop driving immediately and transport the car to a Land Rover specialist on a flatbed truck. If caught at the first faint knock before the shaft snaps, a specialist can drop the sump, inspect the journals, flush the oil galleries, and fit new OEM-grade main and big-end bearings alongside a new oil pump. If the crankshaft has snapped or scored the block, fitting a reconditioned engine is the only reliable fix.<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">2. Oil Pump Housing Fracture and Low Oil Pressure<\/h3>\n\n\n\n<p>The oil pump pushes lubricant through narrow galleries to the crankshaft, camshafts, and twin <a href=\"https:\/\/en.wikipedia.org\/wiki\/Turbocharger\">turbochargers<\/a>. On many Discovery 4 diesel engines, repeated heat cycles and engine vibration weaken the oil pump casing, or the belt tensioner mounting boss cracks. A sudden drop in oil pressure starves moving metal surfaces within seconds.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Warning signs:<\/strong> A red oil pressure warning light on the dashboard, a sudden harsh change in engine note, or rapid loss of smoothness while driving.<\/li>\n\n\n\n<li><strong>Solution:<\/strong> Switch off the ignition at once and do not restart the engine to check if the warning light clears. Have a garage run a mechanical oil pressure gauge test to separate a faulty pressure sensor from a failed pump. If pressure is genuinely low, replace the complete oil pump assembly, clean the sump pickup strainer, and replace the front timing belt kit at the same time.<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">3. Timing Chain and Tensioner Wear<\/h3>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"892\" height=\"450\" src=\"https:\/\/www.royalrebuilds.co.uk\/blog\/wp-content\/uploads\/2026\/11\/Timing-Chain-and-Tensioner-Wear.png\" alt=\"\" class=\"wp-image-233\" title=\"Timing Chain and Tensioner Wear\" srcset=\"https:\/\/www.royalrebuilds.co.uk\/blog\/wp-content\/uploads\/2026\/11\/Timing-Chain-and-Tensioner-Wear.png 892w, https:\/\/www.royalrebuilds.co.uk\/blog\/wp-content\/uploads\/2026\/11\/Timing-Chain-and-Tensioner-Wear-300x151.png 300w, https:\/\/www.royalrebuilds.co.uk\/blog\/wp-content\/uploads\/2026\/11\/Timing-Chain-and-Tensioner-Wear-768x387.png 768w\" sizes=\"auto, (max-width: 892px) 100vw, 892px\" \/><\/figure>\n\n\n\n<p>While the <a href=\"https:\/\/www.royalrebuilds.co.uk\/land-rover-engines\">Land Rover engines<\/a> use a front timing belt, especially in the Discovery 4 model to drive the fuel pump and camshafts, a secondary timing chain at the rear of the cylinder heads links the inlet and exhaust camshafts.&nbsp;Poor oil quality and carbon sludge wear down the plastic chain guides and hydraulic tensioners. If the chain stretches too far, valve timing drifts or the chain jumps a tooth, causing the pistons to strike the valves.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Warning signs:<\/strong> A sharp metallic rattle or ticking noise lasting two to five seconds on a cold morning start, rough idling, delayed throttle response, or engine management fault codes.<\/li>\n\n\n\n<li><strong>Solution:<\/strong> Book a workshop visit before the chain slips. Replacing the rear camshaft timing chains, hydraulic tensioners, and guides requires removing the cylinder head covers\u2014or lifting the body\u2014so always insist on genuine OEM parts. Pair the repair with an engine oil flush and fresh synthetic oil so clean oil reaches the new tensioners immediately.<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">4. Turbocharger and Actuator Faults<\/h3>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"892\" height=\"450\" src=\"https:\/\/www.royalrebuilds.co.uk\/blog\/wp-content\/uploads\/2026\/11\/Turbocharger-and-Actuator-Faults.png\" alt=\"\" class=\"wp-image-234\" title=\"Turbocharger and Actuator Faults\" srcset=\"https:\/\/www.royalrebuilds.co.uk\/blog\/wp-content\/uploads\/2026\/11\/Turbocharger-and-Actuator-Faults.png 892w, https:\/\/www.royalrebuilds.co.uk\/blog\/wp-content\/uploads\/2026\/11\/Turbocharger-and-Actuator-Faults-300x151.png 300w, https:\/\/www.royalrebuilds.co.uk\/blog\/wp-content\/uploads\/2026\/11\/Turbocharger-and-Actuator-Faults-768x387.png 768w\" sizes=\"auto, (max-width: 892px) 100vw, 892px\" \/><\/figure>\n\n\n\n<p>The 3.0 SDV6 uses a sequential twin-turbocharger setup that operates under extreme exhaust heat and rotational speed. Carbon buildup in the oil feed lines restricts lubrication to the turbo bearings, while electronic boost actuators can stick due to soot and heat exposure.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Warning signs:<\/strong> A loud, high-pitched whining or siren noise under acceleration, thick blue smoke from the exhaust pipes, sluggish pull when overtaking, and a &#8220;Restricted Performance&#8221; message on the instrument cluster.<\/li>\n\n\n\n<li><strong>Solution:<\/strong> Run a diagnostic fault scan and smoke test to check whether the fault lies with an electronic actuator or worn turbine bearings. Sticking actuators can often be replaced or recalibrated separately. If the turbocharger unit has failed, fit a balanced OEM or reconditioned turbocharger and always replace or flush the oil feed and return pipes so old carbon debris does not ruin the new unit.<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">5. EGR Valve and Cooler Blockages<\/h3>\n\n\n\n<p>The Exhaust Gas Recirculation (EGR) system lowers combustion temperatures by feeding measured exhaust gas back into the intake manifold. Over thousands of miles of short UK journeys, sticky soot clogs the EGR valves and cracks the internal cooling cores. Blocked valves choke airflow, while cracked coolers allow coolant to enter the intake system.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Warning signs:<\/strong> Heavy black smoke under load, sudden activation of limp mode, uneven idling, higher fuel consumption, and unexplained coolant loss without visible puddles under the vehicle.<\/li>\n\n\n\n<li><strong>Solution:<\/strong> Have a specialist inspect live EGR airflow values and pressure-test the cooling circuit. Lightly sooted valves can be removed and ultrasonically cleaned, while seized valves or internally leaking coolers require complete replacement with updated parts. Following repair, take the vehicle on regular 30-minute motorway runs to keep exhaust temperatures high enough to burn off soot.<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">6. Hidden Oil Cooler and Rocker Cover Leaks<\/h3>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"892\" height=\"450\" src=\"https:\/\/www.royalrebuilds.co.uk\/blog\/wp-content\/uploads\/2026\/11\/Hidden-Oil-Cooler-and-Rocker-Cover-Leaks.png\" alt=\"\" class=\"wp-image-235\" title=\"Hidden Oil Cooler and Rocker Cover Leaks\" srcset=\"https:\/\/www.royalrebuilds.co.uk\/blog\/wp-content\/uploads\/2026\/11\/Hidden-Oil-Cooler-and-Rocker-Cover-Leaks.png 892w, https:\/\/www.royalrebuilds.co.uk\/blog\/wp-content\/uploads\/2026\/11\/Hidden-Oil-Cooler-and-Rocker-Cover-Leaks-300x151.png 300w, https:\/\/www.royalrebuilds.co.uk\/blog\/wp-content\/uploads\/2026\/11\/Hidden-Oil-Cooler-and-Rocker-Cover-Leaks-768x387.png 768w\" sizes=\"auto, (max-width: 892px) 100vw, 892px\" \/><\/figure>\n\n\n\n<p>The Discovery 4 V6 engine places its oil cooler inside the central &#8220;vee&#8221; between the two cylinder banks. Heat degrades the rubber seals over time, allowing engine oil to pool in the valley beneath the intake manifolds. Because thick plastic acoustic covers sit over the engine, small leaks often go unnoticed until oil levels drop dangerously low.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Warning signs:<\/strong> A strong smell of burning oil near the bonnet after a drive, dark oil stains on the driveway, wisps of smoke rising from the rear of the engine bay, or frequent low oil level warnings on the dash.<\/li>\n\n\n\n<li><strong>Solution:<\/strong> Remove the upper acoustic engine cover and shine a torch into the central valley between the cylinder heads to trace the source. Replace the degraded oil cooler seals, gaskets, and rocker cover seals, and clean all pooled oil from the engine valley and bellhousing drainage channels so hot exhaust pipes do not ignite residue.<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">7. Cracked Inlet Manifolds and Coolant Overheating<\/h3>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"892\" height=\"450\" src=\"https:\/\/www.royalrebuilds.co.uk\/blog\/wp-content\/uploads\/2026\/11\/Cracked-Inlet-Manifolds-and-Coolant-Overheating.png\" alt=\"\" class=\"wp-image-236\" title=\"Cracked Inlet Manifolds and Coolant Overheating\" srcset=\"https:\/\/www.royalrebuilds.co.uk\/blog\/wp-content\/uploads\/2026\/11\/Cracked-Inlet-Manifolds-and-Coolant-Overheating.png 892w, https:\/\/www.royalrebuilds.co.uk\/blog\/wp-content\/uploads\/2026\/11\/Cracked-Inlet-Manifolds-and-Coolant-Overheating-300x151.png 300w, https:\/\/www.royalrebuilds.co.uk\/blog\/wp-content\/uploads\/2026\/11\/Cracked-Inlet-Manifolds-and-Coolant-Overheating-768x387.png 768w\" sizes=\"auto, (max-width: 892px) 100vw, 892px\" \/><\/figure>\n\n\n\n<p>Plastic inlet manifolds on the 3.0 diesel engines frequently split along their seam under high boost pressure, causing air leaks and uneven fuel burning. Alongside boost leaks, failing thermostat housings, split coolant pipes, or head gasket breaches cause rapid overheating. Because the Discovery 4 is a heavy 4&#215;4, running the engine hot warps the aluminium cylinder heads quickly.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Warning signs:<\/strong> A hissing sound when accelerating, a rising temperature gauge, sweet-smelling steam from the grille, or milky white residue under the oil filler cap caused by coolant mixing with engine oil.<\/li>\n\n\n\n<li><strong>Solution:<\/strong> If the engine overheats, pull over immediately and let it cool completely before opening the bonnet. Pressure-test the cooling system to replace cracked plastic crossover pipes, thermostat housings, or radiators, and perform a chemical block test to confirm the head gaskets are intact. For boost leaks, perform a smoke test and replace the split plastic inlet manifold\u2014never attempt temporary glue or sealant repairs on pressurised manifolds.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Know your Land Rover Discovery 4 engine oil Capacity<\/h2>\n\n\n\n<p>Independent UK specialists recommend changing the oil and filter every 6,000 to 8,000 miles using fully synthetic 5W-30 oil meeting the STJLR.03.5005 specification. Checking the exact Land Rover Discovery 4 Engine Oil Capacity before servicing prevents overfilling or underfilling:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><a href=\"https:\/\/www.royalrebuilds.co.uk\/land-rover-2.7-engines\">2.7 TDV6<\/a> (2009\u20132011): 5.45 litres (with filter)<\/li>\n\n\n\n<li><a href=\"https:\/\/www.royalrebuilds.co.uk\/land-rover-3.0-engines\">3.0 TDV6<\/a> \/ SDV6 (2009\u20132016): 5.9 litres (with filter)<\/li>\n\n\n\n<li>5.0 V8 Petrol (2009\u20132016): 8.0 litres (with filter)<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Land Rover Discovery 4 Engine Replacement Cost<\/h2>\n\n\n\n<figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"892\" height=\"450\" src=\"https:\/\/www.royalrebuilds.co.uk\/blog\/wp-content\/uploads\/2026\/11\/Land-Rover-Discovery-4-Engine-Replacement-Cost.png\" alt=\"\" class=\"wp-image-237\" title=\"Land Rover Discovery 4 Engine Replacement Cost\" srcset=\"https:\/\/www.royalrebuilds.co.uk\/blog\/wp-content\/uploads\/2026\/11\/Land-Rover-Discovery-4-Engine-Replacement-Cost.png 892w, https:\/\/www.royalrebuilds.co.uk\/blog\/wp-content\/uploads\/2026\/11\/Land-Rover-Discovery-4-Engine-Replacement-Cost-300x151.png 300w, https:\/\/www.royalrebuilds.co.uk\/blog\/wp-content\/uploads\/2026\/11\/Land-Rover-Discovery-4-Engine-Replacement-Cost-768x387.png 768w\" sizes=\"auto, (max-width: 892px) 100vw, 892px\" \/><\/figure>\n\n\n\n<p>When internal damage goes beyond minor parts, owners must compare the Land Rover Discovery 4 Engine Replacement Cost against the value of the vehicle. Pricing across independent UK Land Rover garages depends on whether you choose a donor unit, a rebuilt block, or full Land Rover Discovery 4 Engine Supply and Fit packages.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><td><strong>Service \/ Repair Type<\/strong><\/td><td><strong>Estimated UK Cost (2026)<\/strong><\/td><td><strong>Typical Turnaround Time<\/strong><\/td><\/tr><\/thead><tbody><tr><td><strong>EGR Valve or Oil Cooler Seal Repair<\/strong><\/td><td>\u00a3400 \u2013 \u00a31,100<\/td><td>1 \u2013 2 working days<\/td><\/tr><tr><td><strong>Turbocharger Replacement (Single\/Twin)<\/strong><\/td><td>\u00a31,200 \u2013 \u00a32,500<\/td><td>2 \u2013 3 working days<\/td><\/tr><tr><td><strong>Used Donor Engine (Supply &amp; Fit)<\/strong><\/td><td>\u00a32,200 \u2013 \u00a34,200<\/td><td>5 \u2013 6 working days<\/td><\/tr><tr><td><strong>Reconditioned Engine (Supply &amp; Fit)<\/strong><\/td><td>\u00a33,500 \u2013 \u00a36,500<\/td><td>6 \u2013 8 working days<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\">How to protect your Discovery 4 engine<\/h2>\n\n\n\n<p>A few simple habits prevent most failures:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Change the oil every 8,000 to 10,000 miles using the correct specification.<\/li>\n\n\n\n<li>Replace both timing belts on time, never just the front one.<\/li>\n\n\n\n<li>Drive at 60 to 70 mph for at least 20 minutes once a week so the DPF can regenerate. An amber DPF light means keep driving to clean it; a red light means see a specialist. Never remove the DPF; it is illegal and the car will fail its MOT.<\/li>\n\n\n\n<li>Check the oil level monthly and investigate a rising level, which signals diesel dilution.<\/li>\n\n\n\n<li>Listen on every cold start. Stop immediately if you hear a knock or see the oil pressure light.<\/li>\n\n\n\n<li>Use a diagnostic tool that can read Land Rover-specific fault codes and live data.<\/li>\n\n\n\n<li>Keep a full service history. When you sell the car, that history is what protects its value and proves the engine was cared for.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Frequently Asked Question<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">1. What are the first signs of Discovery 4 engine failure?<\/h3>\n\n\n\n<p>The earliest signs are a deep knocking noise that worsens under load, a flickering oil pressure light, and metal flecks in the oil.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">2. How much oil does a Discovery 4 3.0 diesel take?<\/h3>\n\n\n\n<p>About 5.9 litres with the filter. The 2.7 takes about 5.5 litres. Use 5W-30 meeting the maker&#8217;s low-SAPS specification.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">3. When should the Discovery 4 timing belt be changed?<\/h3>\n\n\n\n<p>Every 7 years or 112,000 miles on the 3.0, and 7 years or 105,000 miles on the 2.7, whichever comes first. Both belts must be done together.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">4. How much does a Discovery 4 engine replacement cost in the UK?<\/h3>\n\n\n\n<p>Around \u00a33,500 to \u00a36,500 supplied and fitted for a reconditioned unit, depending on engine code. New factory engines cost \u00a37,000 to \u00a312,000+.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">5. Can a Discovery 4 engine be rebuilt instead of replaced?<\/h3>\n\n\n\n<p>Sometimes. If the block is sound, a specialist rebuild costs roughly \u00a35,000 to \u00a38,000, but a snapped crankshaft often makes replacement the better option.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">6. Is the Discovery 4 3.0 diesel reliable?<\/h3>\n\n\n\n<p>It can be, with regular, correct-spec oil changes and on-time timing belt service. Neglected servicing is what turns its weak points into failures.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">7. What does a knocking noise mean on a Discovery 4?<\/h3>\n\n\n\n<p>It usually points to bottom-end bearing wear or oil starvation. Stop driving and have the oil pressure tested immediately.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">8. Why does my Discovery 4 keep going into limp mode?<\/h3>\n\n\n\n<p>Common triggers are turbo, EGR, boost or DPF faults. A Land Rover-capable diagnostic scan will identify the cause.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">9. Does short-trip driving damage a Discovery 4 diesel?<\/h3>\n\n\n\n<p>Yes. Short cold trips block the DPF and dilute the oil with diesel from failed regenerations. A regular longer run at motorway speed helps.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">10. Should I buy a high-mileage used Discovery 4?<\/h3>\n\n\n\n<p>Only with a full service history, evidence of timing belt replacement, no knock on cold start, and clean oil with no metal particles.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Land Rover Discovery 4 Engine Problems Owners Shouldn\u2019t Ignore The Discovery 4 is a capable family and towing vehicle, but its diesel engines can develop costly faults. UK models from 2009 to 2016 include the early 2.7 TDV6 and the more common 3.0 TDV6 and SDV6. Knocking, low oil pressure, poor acceleration and coolant loss [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":231,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[2],"tags":[79,3,60,81],"class_list":["post-224","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-land-rover","tag-jlr","tag-land-rover","tag-land-rover-discovery","tag-land-rover-discovery-4"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.royalrebuilds.co.uk\/blog\/wp-json\/wp\/v2\/posts\/224","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.royalrebuilds.co.uk\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.royalrebuilds.co.uk\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.royalrebuilds.co.uk\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.royalrebuilds.co.uk\/blog\/wp-json\/wp\/v2\/comments?post=224"}],"version-history":[{"count":11,"href":"https:\/\/www.royalrebuilds.co.uk\/blog\/wp-json\/wp\/v2\/posts\/224\/revisions"}],"predecessor-version":[{"id":253,"href":"https:\/\/www.royalrebuilds.co.uk\/blog\/wp-json\/wp\/v2\/posts\/224\/revisions\/253"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.royalrebuilds.co.uk\/blog\/wp-json\/wp\/v2\/media\/231"}],"wp:attachment":[{"href":"https:\/\/www.royalrebuilds.co.uk\/blog\/wp-json\/wp\/v2\/media?parent=224"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.royalrebuilds.co.uk\/blog\/wp-json\/wp\/v2\/categories?post=224"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.royalrebuilds.co.uk\/blog\/wp-json\/wp\/v2\/tags?post=224"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}